Team Keychain pt 2 (final)

-
I'm going to keep this short and sweet, because the process that I used to cast the key chain is the same as the one that I used to cast the butterfly signet ring. However, I did get a good picture right after the cast was taken out of the mold. I also took a picture comparing the 3D print to the finished cast. There are some small flaws, but I am overall very happy with it.


Comments

Post a Comment

Popular posts from this blog

Bureau of Balance Bracer pt 1 of 1

-
Image
Making jewelry can get really expensive and I am but a broke college student, so we take a break from your regularly scheduled programming to take a look at a significantly different project than the last. I was going to my local convention as Taako from The Adventure Zone, and I needed a Bureau of Balance bracer of course. I might make another post in the future detailing the making of this further, so if you would like that, please let me know! For now, though, here's the condensed version. I used a leather bracer pattern that I found online somewhere to figure out the general shape and dimension of the bracer. I then added the Bureau of Balance symbol and some (purely aesthetic) lacing holes. Then, being a college student in a dorm, took the flat 3D print and a disposable baking tin to my Keurig and filled the tin with hot water and set the print in it. Having laid a thin washcloth on my arm, I then placed the now bendable print on my arm and molded it to the shape of my arm. Ri...
Read more

6 NAND Flip Flop Ring pt 2

-
Image
 I initially attempted to carve this ring design from wax for my lost wax casting project. It initially started off well, but I am not particularly good at carving anything, much less wax and I was running out of time, so my professor thankfully suggested I stick with 3D printing which I'm a lot better at. My first instinct was to make the design flat and then shape it as I did with the butterfly ring, but there was a lot of risk in cracking the design if I did so. I ended up going with the design on the right, but after seeing the finished ring, I rather wish I went with the left. I also ended up making the band too thick. It was initially fitted to my middle finger, but fits my thumb a lot better. Ah well you live and you learn I suppose. 
Read more

Butterfly Signet Ring pt 1

-
Image
I started making jewelry a little under a year ago, but I've been making 3D printed designs since 2016 (I'm a big fan of Fusion 360, despite all of the hate I see about it lmao) The first time I mashed the two together though, I made a signet ring with a butterfly impression. Why a butterfly? I think they're quite amazing, from the delicate nature of their wings to the fact that they change from a caterpillar which cannot fly to butterflies which can. Anyways, the goal was to create a design which could be sand cast, meaning no overhangs and a flat back, and it would preferably be able to make an actual impression in wax. The first part in achieving this goal was to make a 3d printed ring, and make sure that it had the shape, dimensions, and general feel that I wanted. There were a few iterations before I settled on one, some too big, some too small, some too thick but I finally settled on this. (Please excuse my fat, crooked fingers lol)
Read more